How to choose Kid's dental chair in a dental clinic?

In recent years, there have been more and more dental clinics. Kid's dental chair is also an indispensable equipment in dentistry, so how to choose it? The following editor will give you a brief introduction.

1. The basic method of choosing Kid's dental chair

1. The price of Kid's dental chair is the main consideration. How to save money and ensure quality?

It depends on the amount of business you expect. If the business volume is relatively large, you can buy equipment with good quality and a little more expensive price. If the business volume is relatively small, you can buy equipment with a higher cost performance.

2. To identify the quality of Kid's dental chair, observations should be made from the following aspects.

Observe the appearance of the machine first to see if the shell joints are tight. If the gap is large, the quality is unqualified.

Then, look at the finish and machining accuracy of the metal parts. The metal accessories here mainly refer to three-purpose spray guns and mobile phone cases. If it is rough, the quality is not good. Then, open the housing and observe the seat motor or oil pump.

2. The professional method of choosing Kid's dental chair

If you can make the above judgment, you have mastered the basic method of selection. The following will introduce how to choose from a more professional perspective.

1. Hygiene. Are there any dead spots in the body? Hygienic blind spots refer to parts that are difficult or impossible to clean. Some lamp arms have rubber covers to cover the joints and keep them beautiful. Strictly speaking, these rubber covers are also sanitary dead corners. Care must be taken to clean these dead corners, otherwise they do not meet the sanitary requirements. Disposable straws can be configured for strong and weak suction requirements. If the straws are used repeatedly, they must be able to withstand high temperature disinfection at 135 degrees. Of course, the design of the multifunctional foot switch and the non-inductive lamp is to meet the needs of hygiene.

2. After-sales service, especially maintenance. Some companies rarely provide after-sales service or do not provide services after selling products. When the machine fails, it cannot be repaired immediately, causing many unnecessary losses. The after-sales service of Kid's dental chair stores is relatively complete.

3. Installation is very important. If the installation and debugging are not in place, there will be problems, which is understood by every experienced engineer. Therefore, when purchasing, you must find a company with good strength, request it to provide complete installation drawings, product dimensions, technical parameters, etc., and actively cooperate.

4. Operation training is very important. Many failures are caused by improper installation and debugging, or improper use by doctors. Therefore, operation training is very important.

The above is a brief introduction to you about how to choose Kid's dental chair in a dental clinic. I hope you can have a better understanding of it after reading it.